The Profile Design Sonic Ergo 52a Aerobar is a clip-on aerobar system combining the low-profile Sonic bracket, Ergo armrests, and 52-degree aluminium extensions. The bracket is shaped to minimize frontal area, while the 52a extension profile gives riders the choice of a higher hand position for a shrugged posture or a lower grip for a more open, head-up position.
Fit adjustment is central to this Profile Design aerobar. Extension length and rotation adjust through the top bolt, and the clip-on arrangement also allows extension width and tilt adjustment. The armrests offer 100 distinct positions; with compatible risers, the system provides up to 1,500 possible configurations. The flippable Ergo armrests can be swapped side to side or rotated to make smaller position changes for detailed fit tuning.
The 10 mm-padded Ergo armrests adjust from 124 mm to 290 mm wide in 18.5 mm steps with the extensions at 100 mm. Armrest offset ranges from -70 mm to -17.5 mm in 7.5 mm steps. Minimum armrest stack is 60 mm, and compatible risers can bring stack to 130 mm with 70 mm of spacers.
Built from 6061-T6 aluminium, the Sonic Ergo 52a Aerobar has 400 mm extensions with a 52-degree angle, 87 mm rise, and 22.2 mm outer diameter. The extensions are pre-drilled for bar-end shifter cable routing and accept electronic or mechanical shifters. It clamps to 31.8 mm handlebars, or 26.0 mm bars with shims, and comes in anodized matte black at 564 g.
- Sonic bracket with minimal frontal area
- 52-degree, 400 mm aluminium aerobar extensions
- Flippable Ergo armrests with 10 mm pads
- Up to 100 armrest positions and 1,500 configurations with risers
- Adjustable extension length, rotation, width, and tilt
- Fits 31.8 mm handlebars; 26.0 mm with shims
- Compatible with electronic and mechanical bar-end shifters
- 6061-T6 aluminium construction with pre-drilled cable routing
- Anodized matte-black finish; 564 g weight