The Profile Design Subsonic Race 39a Aerobar is a low-stack clip-on aerobar for riders pursuing low, narrow positions. It combines the Subsonic bracket with Ergo armrests that closely cup the arms, while the 39a aerobar extensions deliver a 39-degree angle and 87 mm rise. The system is black and weighs 590 g in total.
Its fit range centers on armrest adjustment. Armrest offset ranges from -85 mm to -17.5 mm in 7.5 mm steps, and armrest width ranges from 142 mm to 272 mm in 18.5 mm steps when the extensions are set at 100 mm. Moving the armrests creates 80 distinct position options; compatible risers expand the system to up to 1,200 possible configurations.
The Subsonic bracket begins with a 40 mm minimum armrest stack. Compatible riser kits can add up to 70 mm of stack in 5 mm increments without changing the relationship between the armrests and grips. Extension width and tilt are adjustable, while extension rotation is set with the shaft bolt. Once the 340 mm extensions have been cut, they retain 40 mm of length adjustment.
This Profile Design aerobar base bar clamp fits 31.8 mm handlebars, or 26.0 mm handlebars with shims. The setup includes Ergo armrests with 10 mm pads. Use 6 Nm for the bar clamp, 5 Nm for the extension clamp, and 4.7 Nm for the armrest bolts.
- Low-stack Subsonic clip-on aerobar bracket
- 39a aerobar extensions with a 39-degree angle and 87 mm rise
- Ergo armrests with 10 mm pads cup the arms for a narrow position
- Armrest width adjusts from 142 mm to 272 mm
- Armrest offset adjusts from -85 mm to -17.5 mm in 7.5 mm steps
- 40 mm minimum armrest stack; compatible risers add up to 70 mm in 5 mm increments
- 31.8 mm base bar clamp diameter; 26.0 mm with shims
- Black aerobar system weighs 590 g