Stages Gen 3 single-sided Power R meter built onto a drive-side Shimano XT M8120 crank arm with a 32t chainring. Compatible with all Shimano Hollowtech II MTB drivetrains. Also available as a dual-sided LR power meter crankset and non-drive side L power meter. *Does not include left side crank arm.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions.
Individual meter calibration for the most accurate results.
Stages Power meters are calibrated individually to ensure a +/- 1% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation.
- +/- 1 % accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelorometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength
- Accuracy: ± 1%
- Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head screw access on the drive side
- Weight: Only adds 35g to base crankset
- Battery Life: 175+ hours (via 2 coin cell: CR2032)
- Power range (Watts): 0 to 2500
- Cadence range (rpm): 20-220
- Water resistance rating: IPX7
- Chainring size 32t
- Lengths: 170mm, 175mm